Product Line
Online service

3-6Gallon Bbottle Semi-Auto Stretch Blow Moulding Machine JND-90

Add to Enquiry List

Brief introduction

JND-90 semi-auto stretch blow molding machine is specially designed to produce 3-6 gallon bottle and 25L wide mouth jar. Its max output is up to 90 BPH for 5-gallon bottle and even could reach 120 bottles per hour in certain case.

JND-90 consists of main unit and rotary infrared heater. The ordinary quartz lamp cannot heat preform ideally because the preform wall is excessively thick. The infrared heater with high penetrative force can heat the inside and outside of preform simultaneously and keep preform in even heating, therefore high shaping quality.

What an operator should do during production is just to put heated preform into the blow mold and press the switch, and then computer will take care of the whole procedure

Main technical standards

General Information

JND-120

JND-90

Clamping Force

34T

30T

Clamping Stroke

330mm

330mm

Max. Stretching Stroke

550mm

450mm

Bottom Moving Stroke

70mm

--

Number of Cavities

1 Cavity

1 Cavity

Theoretical Output

120BPH

90BPH

Max. Mould Thickness

400mm

380mm

Space Between

Tie Bars

520*600mm

480*550mm

Electrical System

Voltage Standard

AC 380V/50HZ

Number of Heating Zone

2 Sections

2 Sections

Total Power(Full Loaded)

15kw

15kw

Container

Max. Container Volume

25L

25L

Neck Diameter Range

65mm

65mm

Max. Container Diameter

400mm

330mm

Max. Container Height

550mm

550mm

Auxiliary System

Low Air compressor

8-10Bar

High Air compressor

30Bar

Air Dryer

2.0/30

Dimension & Weight (L×W×H)

Blow molding machine

2600*1900*1950mm

1550*820*2000mm

Preform Autoloader

--

2520*680*1550mm

Net Weight

5.2Ton

1.4Ton

BACK | | NEXT
More products from this category