Product Line
Online service

3-6Gallon Bottle Automatic Stretch Blow Molding Machine JND-120

Add to Enquiry List

Brief introduction

JND-120 auto stretch blow molding machine are used to produce 3-6 gallon PET/PC bottle. The whole procedure is automatic. It is controlled with microcomputer. In order to achieve the purpose of automatic transporting bottles, the user should connect the conveyor belt with the blow molding machine. By transmission device, the machine can be connected to the filling machine directly and start inline filling. the whole bottle production from preform conveying to bottle discharge is completed automatically. it is made up with three main parts: preform loading system, Heater channel & blow station.

Main technical standards

General Information

JND-120

JND-90

Clamping Force

34T

30T

Clamping Stroke

330mm

330mm

Max. Stretching Stroke

550mm

450mm

Bottom Moving Stroke

70mm

--

Number of Cavities

1 Cavity

1 Cavity

Theoretical Output

120BPH

90BPH

Max. Mould Thickness

400mm

380mm

Space Between

Tie Bars

520*600mm

480*550mm

Electrical System

Voltage Standard

AC 380V/50HZ

Number of Heating Zone

2 Sections

2 Sections

Total Power(Full Loaded)

15kw

15kw

Container

Max. Container Volume

25L

25L

Neck Diameter Range

65mm

65mm

Max. Container Diameter

400mm

330mm

Max. Container Height

550mm

550mm

Auxiliary System

Low Air compressor

8-10Bar

High Air compressor

30Bar

Air Dryer

2.0/30

Dimension & Weight (L×W×H)

Blow molding machine

2600*1900*1950mm

1550*820*2000mm

Preform Autoloader

--

2520*680*1550mm

Net Weight

5.2Ton

1.4Ton

BACK | | NEXT
More products from this category